3 Most Common Plumbing Problems And How To Fix Them

Although you might not be aware of this, some parts of the home plumbing system are as delicate as they are important. For instance, some parts of the sewer system, especially the drains, are quite delicate and necessitate proper usage and regular maintenance activities. Expectedly, clogged drains are some of the most common plumbing problems. They are usually caused by careless and negligent household habits like flushing “insoluble” materials other than tissue paper. In addition to clogged drains, the two other most common plumbing problems are in-house pipe leakages and supply pipe blockages. As you can see, all the three most common plumbing problems can be controlled or avoided by adopting a fair level of responsibility in the usage and maintenance of the home plumbing system. Consider the following solutions every time you are faced with any of these problems.

Leaking In-House Pipes

Leaking (in-house) pipes can easily turn into bursting pipes if they are not fixed quickly. Mostly, leakages occur in weak piping joints. Also, pipes deteriorate over time and they might start to leak due to old age, corrosion or poor quality. You can also start a leak if you puncture a pipe accidentally, when drilling holes into the wall, maybe to fix a hanging unit. Whichever the cause, you should inspect your walls, floors, and ceilings regularly and check for damp spots, which usually indicate a concealed leakage. Old pipes should be replaced and the concealed piping network noted to avoid accidental pipe punctures. Slow-leaking pipes should be repaired as soon as possible to avoid a pipe bursting incident. Incidentally, high water pressure can cause leaking pipes to burst. In case of a pipe burst, switch off the water supply immediately and then call a local professional plumber for assistance. For instance, you can call any reputable plumbing company and make a request for plumbing repair in Leander if you live around Texas.

Blocked/ Clogged Drains

Ordinarily, drainage pipes get clogged due to grease/oil accumulation, stuck foreign objects, root infiltration, or physical damage, perhaps due to corrosion or old age. When it comes to blocked drains, pipe traps/bends are some of the most vulnerable sections. Inspect your drainage and sewer system regularly and check for any signs of blockages, such as foul odors, backed up toilets, and wet patches on your lawn atop the sewer line. If you notice any of these signs, try to unclog/unblock the drain with a plunger. Alternatively, pour an enzyme drain cleaner into the blocked drain pipe and then flush with hot water. Avoid using chemical-based drain cleaners because they might corrode your pipes — they are also harmful to your health and the environment. If none of these DIY methods works, call a professional plumber for assistance.

Blocked Supply Pipes

The home water supply piping network is quite intricate and inscrutable. Typically, water supply pipes are laid beneath the ground and then linked to the home plumbing system — either under the house or through the walls. Just like any other pipes, the supply piping network can get damaged or blocked. The most compelling sign that you have a supply piping problem is when very little (trickling) water comes out of the faucets, which indicates partial blockage/damage, or no water at all, which indicates a full blockage/damage. In either case, it is advisable to call a registered professional plumber as soon as possible.

Leave a Reply

Your email address will not be published. Required fields are marked *

Skip to content